Bieniawski, Z.T., 1976, Rock Mass Classification in Rock Engineering Applications, In Proceedings of a Symposium on Exploration for Rock Engineering, 1976, Vol. 12, 97-106.
CDC, 2019.02.14., Retrieved from https://www.cdc.gov/niosh/mining/topics/groundcontroloverview.html
Chang, S.H., Lee, C.H., Choi, S.W., Hur, J.S. and Hwang, J.D., 2014, Design of Unsupported Rock Pillars in a Room-and-Pillar Underground Structure by the Tributary Area Method and the Pillar Strength Estimation, Tunnel and Underground Space, Vol. 24, No. 5, 335-343.10.7474/TUS.2014.24.5.335
Esterhuizen, G.S., Dolinar, D.R. and Ellenberger, J.L., 2011, Pillar Strength in Underground Stone Mines in the United States. International Journal of Rock Mechanics and Mining Sciences, Vol. 48, No. 1, 42-50.10.1016/j.ijrmms.2010.06.003
Goodman, R.E. and Shi, G.H., 1985. Block Theory and Its Application to Rock Engineering, Vol. 26, No. 1, 103-105, Englewood Cliffs, NJ: Prentice-Hall.
Grimstad, E. and Barton, N., 1993, Updating the Q-system for NMT, In Proceedings of the International Symposium on Sprayed Concrete-Modern use of wet mix sprayed concrete for underground support, Fagemes, Oslo, Norwegian Concrete Association.7686776
Hoek, E., Kaiser, P.K. and Bawden, W.F., 2000, Support of underground excavations in hard rock, CRC Press, 137-138, Boca Raton, FL, the United States.
Hutchinson, D.J. and Diederichs, M.S., 1996, Cablebolting in Underground Mines, Vol. 477, Richmond^ eBC BC: BiTech Publishers.
Iannacchione, A.T., Marshall, T.E., Burke, L., Melville, R. and Litsenberger, J., 2003, Safer Mine Layouts for Underground Stone Mines subjected to Excessive Levels of Horizontal Stress, Mining Engineering, Vol. 55, No. 4, 25-31.
Jang, M.H., Ha, T.W. and Jeong, H.S., 2018, Optimized Design of Mine Span Considering the Characteristics of Rockmass in Soft Ground, Tunnel and Underground Space, Vol. 28, No. 2, 125-141.
Koo, C.M., Jeon, S.W. and Lee, I.W., 2008, Underground Mine Design and Stability Analysis at a Limestone Mine, Tunnel and Underground Space, Vol. 18, No. 4, 243-251.
KORES, 2017, 2016 Statistics of Mine Accidents, KORES report, 1-7, Retrieved from https://www.kores.or.kr/hkor/ob/ ob07/ob070301/bbs/bbsView.do?bbs_seq_n=11&bbs_cd_n=247¤tPage=1&search_key_n=&search_val_v=&cate_n=&dept_v= (retrieved 2019.02.25
Laubscher, D.H. and Taylor H.W., 1976, The Importance of Geomechanics Classification of Jointed Rock Masses in Mining Operations, In Proceedings of the Symposium on Exploration for Rock Engineering, Vol. 1, 119-128, AA Balkema, Cape Town, Johannesburg.
Laubscher, D.H., 1990, A Geomechanics Classification System for the Rating of Rock Mass in Mine Design, Journal of the Southern African Institute of Mining and Metallurgy, Vol. 90, No. 10, 257-273.
Lee, C.H., Chang, S.H. and Shin, H.S., 2013, A Study on Conceptual Evaluation of Structural Stability of Room-and-Pillar Underground Space, Journal of Korean Tunnelling and Underground Space Association, Vol. 15, No. 6, 585-597.10.9711/KTAJ.2013.15.6.585
Mathews, K.E., Hoek, E., Wyllie, D.C. and Stewart, S.B.V., 1980, Prediction of Stable Excavation Spans for Mining at Depths below 1,000 Metres in Hard Rock, Golder Associates report to CANMET, Department of Energy and Resources: Ottawa.
MCA, 2003, Management of Rockfall Risks in Underground Metalliferous Mines, Kingston ACT, Australia, 34-55.
MOTIE and KORES, 2015, Mining Accident Prevention Manual, KORES report, 63-73, Retrieved from https://www. kores.or.kr/hkor/no/no02/no0201/bbs/bbsView.do?bbs_seq_n=14424&bbs_cd_n=5¤tPage=0&search_key_n=&search_val_v=&cate_n=&dept_v=
MOTIE, 2019, Mine Safety Standard, 20-21, Retrieved from https://www.kores.or.kr/hkor/ob/ob07/ob070301/bbs/bbsView.do? bbs_seq_n=32&bbs_cd_n=247¤tPage=1&search_key_n=&search_val_v=&cate_n=&dept_v=
Nickson, S.D., 1992, Cable Support Guidelines for Underground Hard Rock Mine Operations, Ph.D. dissertation, University of British Columbia.
NIOSH, 2011, Pillar and Roof Span Design for Underground Stone Mines, 1-64, Pittsburgh, PA･Spokane, WA, the United States
Okubo, S. and Yamatomi, J., 2009, Underground Mining Method and Equipment, Civil Engineering Vol. II.
Potvin, Y., 1988, Empirical Open Stope Design in Canada, Ph.D. dissertation, University of British Columbia.
Shin, J.H. and Kim, S.W., 2018, A study on Issues and Improvements Plan for National Safety Assessment, Journal of The Korean Society of Disaster Information. Vol. 14, No. 3, 334-342.
Sunwoo, C. and Jung, Y.B., 2005, Stability Assessment of Underground Limestone Mine Openings by Stability Graph Method, Tunnel and Underground Space, Vol. 15, No. 5, 369-377.
Sunwoo, C., 2018, Proposal of the Unsupported Span of Openings in the Domestic Underground Limestone Mines, Tunnel and Underground Space, Vol. 28, No. 4, 358-371.
Unal, E., 1983, Development of Design Guidelines and Roof Control Standards for Coal Mine Roof, Ph.D. dissertation, Pennsylvania State University, University Park.
Zipf, R.K., 2001, Toward Pillar Design to prevent Collapse of Room-and-Pillar Mines. In 108th Annual Exhibit and Meeting, Society for Mining, Metallurgy and Exploration.
- Publisher :Korean Society for Rock Mechanics and Rock Engineering
- Publisher(Ko) :한국암반공학회
- Journal Title :Tunnel and Underground Space
- Journal Title(Ko) :터널과 지하공간
- Volume : 29
- No :1
- Pages :30-37
- Received Date :2019. 02. 18
- Accepted Date : 2019. 02. 22